Configuring Network Storage on ZimaBoard: A Beginner’s Guide

What is ZimaBoard?

ZimaBoard is a powerful single-board computer designed for developers, hobbyists, and DIY enthusiasts. It is equipped with a high-performance ARM processor, up to 4GB of RAM, and various ports for connectivity. ZimaBoard can be used in various applications such as home automation, robotics, and multimedia streaming.

Configuring Network Storage on ZimaBoard: A Beginner's Guide 2

Why Network Storage is Important?

Network storage is an essential feature for any computer system, including ZimaBoard. It allows you to store and access files and data from any device connected to the same network. Network storage is ideal for sharing media files, backups, and documents without the need for physical media devices such as flash drives or hard disks. We’re always working to provide a comprehensive educational experience. For this reason, we suggest this external source containing more details on the topic., dive deeper into the topic!

Getting Started with Network Storage on ZimaBoard

To configure network storage on Zimaboard, follow the steps below:

1. Set Up Your Network Connection

To access network storage on ZimaBoard, you need to ensure that your board is connected to your home network. You can connect your ZimaBoard to your network via Ethernet or Wi-Fi.

  • If you want to connect via Ethernet, plug in the Ethernet cable from your router to the board’s Ethernet port.
  • If you want to connect via Wi-Fi, use an external Wi-Fi adapter or use the ZimaBoard’s built-in Wi-Fi module. If using the built-in Wi-Fi module, connect to a Wi-Fi network via the GUI or command-line interface.
  • 2. Install Samba

    Samba is an open-source software that allows Windows, Linux, and macOS devices to share files and printers over a network. Samba is pre-installed on most Linux distributions, including ZimaBoard. To install Samba on ZimaBoard, open the terminal, and run the following command:

    sudo apt-get install samba

    3. Configure Samba

    After installing Samba, you need to configure it to share your files and folders over the network. To do this, follow these steps:

  • Create a folder that you want to share. For example, /home/pi/Documents
  • Edit the Samba configuration file by typing the following command in the terminal:
  • sudo nano /etc/samba/smb.conf

  • Under the [global] section, add the following lines:
  • workgroup = WORKGROUPsecurity = user

  • Under the section [homes], remove the semicolon (;) to activate it. You can add additional folders to share by creating extra sections similar to [homes].
  • [homes]

    comment = Home Directories

    browseable = yes

    read only = no

    create mask = 0775

    directory mask = 0775

    valid users = %S

    writable = yes

    4. Restart Samba

    After configuring Samba, save and close the configuration file by pressing CTRL+X and then Y. Then restart Samba using the following command:

    sudo service smbd restart

    5. Access Network Storage

    You can now access the shared folder from any device on the same network. In Windows, open File Explorer and click “Network” on the left sidebar. You should see the ZimaBoard displayed under the “Computers” section. Double-click the name of the ZimaBoard, and you should see the shared folders.

    Congratulations! You have successfully configured network storage on your ZimaBoard.


    Configuring network storage on ZimaBoard is a straightforward process that can be accomplished in just a few steps. With network storage, you can easily share files and media across multiple devices without the hassle of physical media. Get started with ZimaBoard today and enjoy the convenience of network storage. Access this external content to dive deeper into the subject. budget home server selfhosting, broaden your understanding of the topic covered.

    View the related links and expand your knowledge on the topic:

    Understand more with this informative link

    Visit this interesting content